Logo Saint-Gobain
Saint-Gobain Performance Plastics
7301 Orangewood Avenue
Garden Grove, California 92841, United States
Toll Free: (800) 833-5661 • Phone: (714) 630-5818 • Fax: (714) 688-2614
Email: process-systems@saint-gobain.com • Web site: www.furon.com
Print Back
Applications
  • Precise dispense of photoresist, adhesives, solvents and other media included in the molded version

Operations

  • Normally closed valve
  • Creates a vacuum when switching from open back to closed position to suck back a predetermined amount of liquid
  • Adjustment knob on top of valve gives excellent repeatability on the suckback volume

Features and Benefits

  • All virgin PTFE/high purity molded PFA wetted flow path
  • Eliminates dripping of media from nozzles after dispense cycle
  • Adjustable suckback capacity permits precise metering of media
  • Repeatability of suckback amount assures identical dispense volume for each cycle
  • Suitable for use with ultra high-purity or highly corrosive media
  • Innovative Furon SCR spring assures compatibility with HF and HC
  • Suitable for use in ozone applications (select models)
Furon-Suckback-Valve-square_800x800
Suckback Valve Drawing
Unit of Measure
Items Furon-Suckback-Valve-square_800x800
SBVM-144
Furon® Suckback Valve - Pneumatically Actuated Molded Diaphragm Valve (¼ and ½ Inch Orifice) 		Furon-Suckback-Valve-square_800x800
SBVM-144-SCR-F6
Furon Suckback Valve Pneumatically Actuated, Molded 		Furon-Suckback-Valve-square_800x800
SBVM-F44
Furon Suckback Valve Pneumatically Actuated, Molded 		Furon-Suckback-Valve-square_800x800
SBVM-F46
Furon Suckback Valve Pneumatically Actuated, Molded 		Furon-Suckback-Valve-square_800x800
SBVM-F46-SCR-F6
Furon Suckback Valve Pneumatically Actuated, Molded
End Connection Type N/A FNPT N/A FNPT N/A FlareGrip® II N/A FlareGrip® II N/A FlareGrip® II
Orifice N/A 1/4 in
End Connection Size N/A 1/4 in N/A 1/4 in N/A 1/4 in N/A 3/8 in N/A 3/8 in
A - Length N/A 3.0 in76.2 mm N/A 3.0 in76.2 mm N/A 4.30 in109.22 mm N/A 4.6 in109.22 mm N/A 4.6 in116.84 mm
C - Height N/A 1.38 in35.05 mm N/A N/A N/A N/A
D - Diameter N/A 2.10 in53.34 mm N/A N/A N/A N/A
E - Pitch Diameter N/A 2.72 in69.09 mm N/A N/A N/A N/A
Maximum Operating Temperature N/A 266 ºF130 ºC N/A 212 ºF100 ºC N/A N/A N/A
Air Actuator Pressure N/A 70 psig483 kPa N/A N/A N/A N/A
Maximum Operating Pressure (Suckback Capability) N/A 60 psig413 kPa N/A N/A N/A N/A
Maximum Suckback Volume N/A 100 µL
Non-Standard Options N/A
  • Other End Connections available.
  • Non-Standard Options and custom configurations are welcome.
  • Please consult factory for part number, price and delivery.
  • Furon SCR spring for HCI applications
 		N/A N/A N/A N/A
Features/Benefits N/A
  • All virgin PTFE/high purity molded PFA wetted flow path
  • Eliminates dripping of dispense media from nozzles
  • Adjustable suckback capacity permits precise metering of dispense media
  • Repeatability of suckback amount allows identical dispense media over time
 		N/A N/A N/A N/A
Notes N/A
  • When selecting either Flare Grip® or Grab Seal™ ends, we recommend end connections that are larger than the valve orifice size in order to achieve full flow.
  • Adjusting to near zero suckback amount can cause the valve not to seal fully and leak across the valve seat.
  • The valve works best if the nozzle is placed no more than four feet (1.2 m) from the valve.
  • Leak detection port on side has standard port size of 1/4 - 28.
  • For applications in concentrated Hydrochloric (HCI) applications, please consult the factory.
 		N/A N/A N/A N/A
Spring N/A Standard N/A SCR N/A Standard N/A Standard N/A SCR
Diaphragm Material N/A PTFE N/A Modified PTFE N/A PTFE N/A PTFE N/A Modified PTFE
SEL_SET N/A 1/4