Logo Saint-Gobain
Saint-Gobain Performance Plastics
7301 Orangewood Avenue
Garden Grove, California 92841, United States
Toll Free: (800) 833-5661 • Phone: (714) 630-5818 • Fax: (714) 688-2614
Email: process-systems@saint-gobain.com • Web site: www.furon.com
Print Back

J-valves combine a small footprint, high Cv,for a ¾” orifice valve with a fully molded body construction, offering a best in class surface finish.

  • 2-Way configuration
  • Normally closed and Normally open operation
  • High compactness
  • High cycling duty in Slurry & Chemical applications
  • Molded body to ensure premium surface finish and material quality
Unit of Measure

Specifications

Tube Diameter

 N/A 1/2 in

Port Connection

 N/A FlareGrip® II

Maximum Operating Pressure

 N/A 85 psig

Maximum Back Pressure

 N/A 85 psig

Fluid Temperature Range

 N/A 0 to 95 ºC

Pilot Air Actuation Pressure

 N/A 70 to 100 psig

Flow Factor (Cv)

 N/A 2.30

Configuration

 N/A 2-Way

Actuation Type

 N/A Normally Closed

Actuation

 N/A NC Pneumatic

End Connection Type

 N/A FlareGrip® II

Orifice

 N/A 3/4 in

End Connection Size

 N/A 1/2 in

Dimension A

 N/A 0.20 in5.10 mm

Dimension B

 N/A 1.10 in27.40 mm

Dimension C

 N/A 3.50 in88.90 mm

Dimension D

 N/A 5.60 in141.20 mm

Dimension E

 N/A 2.90 in73.70 mm

Dimension F

 N/A 3.60 in91.40 mm

Dimension G

 N/A 5.80 in146.10 mm

Dimension H

 N/A 63.50 mm2.50 in

Dimension I

 N/A 0.30 in7.60 mm

J - Length

 N/A 1.00 in25.40 mm

K - Length

 N/A 3.50 in88.90 mm

Standard Options

 N/A
  • NO: Normally Open
  • Flare Grip® II with nut
  • Consult factory for other end connection configurations

Features/Benefits

N/A
  • High Cv flow factor
  • Superior MTFB (Mean Time Between Failure)
  • Injection Molded, High Purity PFA-Wetted Flow Path with Virgin PTFE Diaphragm
  • No Exposed Metallics
  • Fully Swept Flow Path
  • Assembled,Tested and Double-Bagged in a Class 100 Cleanroom
  • Leak Detection Capability
  • Visible Position Indication
  • High Back Pressure Capability
  • 100% Tested for Operation
  • 0Mounting PatternInterchanges with Major Competitor
  • Combines high Cv flow factor with smaller footprint than PTFE valves with similar flow capabilities
  • Qualified at over two million cycles
  • Meets the semiconductor industry’s high purity chemical requirements
  • Suitable for high backpressure applications
  • Complete drain down
  • No hold up volume
  • Rapid installation due to the high center line