Logo Saint-Gobain
Saint-Gobain Performance Plastics
7301 Orangewood Avenue
Garden Grove, California 92841, United States
Toll Free: (800) 833-5661 • Phone: (714) 630-5818 • Fax: (714) 688-2614
Email: process-systems@saint-gobain.com • Web site: www.furon.com
Print Back

HPVM valves were developed to address applications with a small footprint while packing in critical reliability in demanding applications.

  • 2-Way configuration
  • Manual Multi-turn operation
  • Panel Mount friendly
  • High compactness
  • High cycling duty in Slurry & Chemical applications
  • Molded body to ensure premium surface finish and material quality
Unit of Measure

Specifications

End Connection Type

 N/A FlareGrip® II

Orifice

 N/A 1/4 in

End Connection Size

 N/A 3/8 in

A - Length

 N/A 3.71 in94.23 mm

Panel Mounting Hole

 N/A 0.71 in

Maximum Panel Thickness

 N/A 0.13 in

Maximum Operating Temperature

 N/A 203 ºF95 ºC

Maximum Ambient Operating Temperature

 N/A 140 ºF60 ºC

Maximum Operating Pressure (Water)

 N/A 80 psig552 kPa

Vacuum Capability

 N/A 25 inHg

Flow Factor (Cv)

 N/A 0.07

Body Material

 N/A High Purity Perfluoroalkoxy Alkane (PFA)

Diaphragm Material

 N/A Modified Polytetrafluoroethylene (PTFE)

Actuator Housing Material

 N/A Polypropylene

Features/Benefits

N/A
  • High pressure capability of up to 80 PSIG (552 kPa) where footprint reduction is a primary design constraint
  • Over 3 turns from closed to full open for fine adjustments
  • Injection molded high-purity PFA body with PTFE diaphragm
  • Integral mounting base with top or bottom mount standard
  • Panel mount feature is standard
  • Leak detection port
  • Semi F57 Compliant