26 GPM (100 l/min)
Operations
The Furon High flow bellows pump is pneumatically operated: two bellows made from PTFE reciprocate horizontally. Their pumping frequency is much lower than an equivalent diaphragm pump and results in an extended life. Due to this low frequency and amplitude of the bellows pump, we guarantee a lower level of particle contamination.
All The Furon High flow bellows pump wetted components are manufactured with High Purity PFA and PTFE and are suitable for pumping even the most corrosive concentrated chemicals (acids and solvents).
All other components are manufactured with high technology materials; e.g. PVDF and PEEK, and ensure no ionic contamination of the chemical, even if there is a bellows failure.
Our pumps are assembled in our cleanroom, tested with DI water, cleaned, then double sealed in plastic bags.
Applications
End Connection Type |
N/A Compatible Flare Flare FlareGrip II |
End Connection Size |
N/A 1 in |
Maximum Flow Rate |
N/A 26 gpm100 L/min |
Maximum Suction Head |
N/A 13 ft4 m |
Maximum Air Pressure |
N/A 72.5 psi5 bar |
Maximum Back Pressure |
N/A 58 psi4 bar |
Maximum Air Consumption |
N/A 23.5 SCFM40 m³/h |
Liquid Type |
N/A Chemical |
Fluid Connection |
N/A Flare Fitting Ø 22 x 25 or 7/8" x 1" |
Fluid |
N/A Standard |
Flow Rate |
N/A 0 to 26 gpm0 to 6000 L/h |
Weight |
N/A 32 lb15 kg |
Features/Benefits |
N/A
|